The manufacturer of the seal flow switch tells you that the cooling water enters from the inlet and enters the shaft seal from the outlet after passing through the flow meter, and constantly monitors the operation of the cooling water in the shaft seal. If the cooling water is blocked or leaked during operation, the Seal flow switch will issue an alarm in time to avoid accidents!

Main features of Seal flow switch:
1. Monitor and adjust the water flow and pressure in the shaft seal device.
2.Seal flow switch is easy to install, operate, read and clean.
3. Reduce water consumption, energy consumption and waste water discharge.
4. Protect equipment and shorten downtime.
5. The needle valve is replaced with a large-section bow valve, which effectively solves the blockage.
6. The seal flow switch cleans the flow tube without interrupting the shaft seal water circuit, and continues to work normally without false alarms.
7. According to the readings, directly judge the operation status and problems of the shaft seal, such as: leakage or blockage.
8. When the shaft seal is running normally, the actual flow and actual pressure are equal to the target value.
Today's introduction to the main features of the Seal flow switch is here. If you need it, you can contact our company.