Manufactured and designed with high-tech equipment, Seal flow switches are ideal for monitoring liquids in pipelines. A budget friendly alternative, the Seal flow switch is extremely safe for use in industrial facilities.

The paddles attached to the horizontal surface are suspended in the liquid. Seal flow switch manufacturers tell you that once the liquid starts to flow level with the paddle, it deflects, triggering the contacts in the microswitch. And use a flexible metal bellows to separate the microswitch from the liquid. You can adjust the set point.
Seal flow switches use the force of liquid flow to push the paddles to identify incoming fluid or the movement of fluid in a pipe. As far as there is no liquid or static liquid, the spring expands and presses down on the magnet vertically.
Seal flow switch manufacturers tell you that when flow occurs and the paddle pushes and rises at an upward angle of 20L~30L or higher, the eccentric wheel of the paddle tries to push the magnet upwards to drive the reed switch, thus in the connection circuit. The manufacturer of the seal flow switch tells you that you can adjust the length of the paddle with the diameter of the pipe.