How to install the flow switch? Seal flow switch manufacturers tell you that this is a question that many customers ask after purchasing a flow switch.

1. How to install the flow switch? Seal flow switch manufacturers tell you that we must classify, and different types of flow switch installations are different. Compared to differential, it is a precise flow control mode, which has precise flow control values. It is installed directly inside the unit, avoiding user installation is incorrect.
2. The manufacturer of the seal flow switch tells you that if the flow switch device is installed at the inlet of the adjacent two copper tube heat exchangers, the pressure difference between the inlet and outlet is measured, which prevents the installation hidden danger of the target type of water flow switch.
3. An external piston and permanent magnet are installed on the external flow channel of the flow switch housing. Seal flow switch manufacturers tell you that when the piston is driven by a pressure differential caused by movement, the magnetic piston will actuate the reed switch set on the seal tongue, and the diameter of the piston flow determines the end. When the flow is cut, the stainless steel spring will push the piston to reset. After the reed switch is moved, it can be used for short-range alarm or command. Perhaps it can integrate an active containment system.
4. The flow switch is placed in the streamlined vortex generator of the fluid, and the velocity of the floating velocity vortex and the velocity of the fluid which is not necessarily proportional, and the total volume flow. Vortex flowmeters are used to measure liquids, gases or steam. It has no moving parts and no dust. The manufacturer of the seal flow switch tells you that the vortex flowmeter may produce a firing sound, not to mention the fluid with high velocity, a spiral that produces a fire.