The Tee flow switch manufacturer tells you that the flow switch is used in different places depending on the system and the type of flow switch, depending on the specific situation.

1. The factory adjustment of the flow switch is near the minimum flow value. The manufacturer of the Tee flow switch tells you that it should not be adjusted to a position lower than the factory setting during use, otherwise the switch will not be able to return to the no-flow position.
2. To increase the flow rate, turn the adjusting screw clockwise. The manufacturer of the Tee flow switch tells you to adjust the flow value after adjusting the factory setting value, and turn the adjustment screw reversibly.
3. After the adjustment, you should check that the setting value of the flow switch is not lower than the factory setting value. The manufacturer of the Tee flow switch tells you to press the main lever several times to check whether the switch has a click when the main lever returns. No, the adjusting screw should be turned clockwise until the lever clicks back.
4. The setting screw of the sealing paint cannot be adjusted. Once changed, it will destroy the control of the flow switch or cause the adjustment to fail and not work.
5. The flow adjustment is too high, the flow direction piece cannot be driven when the flow is low, and the switch cannot operate. Tee flow switch manufacturers tell you that the flow adjustment is too low, the switch is too sensitive, and malfunctions occur.