The manufacturer of Tee flow switch tells you that the flow switch is mainly installed online or inserted in the pipeline of water, gas, oil and other media to trigger the switch to output an alarm signal when the flow rate is higher or lower than a certain value. After the system obtains the signal, it will immediately The corresponding execution unit action can be taken.

The Teeflowswitch manufacturer tells you that the flow switch is a sensor controller that uses various principles to measure the activity of the medium in the pipeline and transmits the on-off signal to the back-end equipment in real time.
use:
The Teeflow switch manufacturer tells you that it is a dual-purpose type, which can be widely used in industrial automation/mechanical equipment/air compression industry/refrigeration and air conditioning. In industrial occasions, it is specifically used in water-cooled welding machines, laser equipment cooling systems, vacuum coating machines, electric furnaces, and polycrystalline silicon. Ingot furnace, etc. Flow switch magnets are not in live waterways and can be used in sewage systems and will function properly.
working principle:
The Teeflowswitch manufacturer tells you that the thermal flow switch is designed using the principle of probe temperature change. Built-in heat sensor and thermal sensor in the probe, and contact with the medium. When measuring, the heat sensor emits stable heat. When there is no medium flow in the pipeline, the heat received by the heat sensor is a stable value. When there is medium flow, the heat received by the heat sensor will change with the flow rate of the medium. Change, the thermal sensor converts the temperature difference signal into an electrical signal, and then converts it into a corresponding contact signal or analog signal through a circuit.
The principle of thermal diffusion flow switch, Teeflowswitch manufacturer tells you that thermal diffusion technology is a technology with excellent performance and high reliability under harsh conditions. Its typical principle is that when two sensing elements are placed in the fluid, one of them is One for heating and another for sensing process temperature. The Teeflowswitch manufacturer tells you that the temperature difference between the two sensing elements is related to the process flow rate and the nature of the process medium. The temperature difference between the two sensing elements is greatest at no flow, but as flow is added, the heated sensing element cools down and the temperature difference decreases. Fluid flow rate directly affects the degree of heat dissipation.