The Tee flow switch manufacturer tells you that the flow switch can be used to monitor the flow rate of the fluid in the pipeline, monitor the flow, or prevent the pump from running dry. It is widely used in various industries where it is necessary to monitor the fluid flow rate in the pipeline or to protect important equipment when the liquid flow fails.

Installation adjustment:
1. The factory adjustment of the water flow switch is near the minimum flow value. The Tee flow switch manufacturer tells you not to adjust it lower than the factory setting position during use, otherwise the switch will not return to the "no liquid flow" position.
2. The Tee flow switch manufacturer tells you that if you need to increase the flow value, you should turn the adjusting screw clockwise. If you want to lower the flow rate after increasing the factory setting value, you can turn the adjusting screw counterclockwise.
3. After the adjustment is completed, check that the set value of the flow switch is not lower than the factory set value. By pressing the main lever several times, check whether there is a "click" sound when the main lever returns. The clock rotates the adjustment screw until the lever returns with a "click".
4. The setting screw for sealing paint cannot be adjusted. Once changed, it will destroy the control of the flow switch or cause the adjustment to fail and fail to work.
5. The Tee flow switch manufacturer tells you that the flow adjustment is too high, and the flow direction piece cannot be driven when the flow is low, and the switch cannot operate. The flow adjustment is too low, the switch is too sensitive, resulting in malfunction.