The paddle flow switch manufacturer tells you that the flow switch is used to monitor fluid flow in a closed pipe, and then provides the switch ON/OFF output signal as a set point. The paddle flow switch manufacturer tells you that the water flow switch will transmit a switch or alarm signal to the control system when the flow is above or below the set point. The control system will make corresponding actions to control the water flow accordingly, for example, when the flow exceeds the upper or lower limit, the flow switch will generate a switch signal to turn the pump on or off.

The paddle flow switch manufacturer tells you that the flow meter is a general term for flow switches, flow sensors and related various medium flow test devices. This is a very large category, and as a branch of it, flow switches have shown relatively excellent product characteristics in many fields.
The paddle flow switch manufacturer tells you that the flow switch is developed on the basis of flow meters and flow sensors. The entire flow switch usually requires two parts: the flow measurement part and the switch signal module. The switch signal is sent according to the flow value. Therefore, the real-time flow is the determining factor for the accuracy of the flow switch.
The flow switch looks easy to manufacture. But in reality, it's not easy. Many companies are offering flow switches, but many of them are unable to provide reliable, high-accuracy flow measurement units. The paddle flow switch manufacturer tells you that by contrast, we have been dealing with flow meters for decades and have accumulated rich experience in design and manufacture. We are your reliable partner.